TU-1 Vacuum & Pressure Gauge

Description

Complete fule pump and vacuum gauge tester. Test Fuel Pressure On Mechanical & Electric Fuel Pumps. It will also Diagnose Improper Timing, Burned Or Stuck Valves, Leaking Manifold, Improper Fuel Mixture, Sticking Choke & More. It Includes Rubber Hose & Brass Fittings For Compatibility With Most Cars.
Test fuel pump output pressure to 10PSI.
Read engine cacuum to 28″ HG.
Check carburetor settings and calce adjustments.
Come with large 4 ” diameter gauge w/ Heavy Rubber Jacket to protect Against Impact and Grease & Grime
24″ long vacuum hose.
Adapters suitable for most vehicles.
Product instructions included.
Case included
Please note: The dial may not point to 0 when you receive the item or after a long time of use. Adjusting the gauge is s a normal operation. Please follow these steps: 1.Remove the rubber coat from the gauge. 2.Use a flat screwdriver to lift the upper half of the gauge.You can lift a little bit from one side and then from opposite direction. 3.After remove the upper half, please use a screwdriver to adjust the screw on the face of the gauge and set the arrow to 0.